Orchestrion Hall, Baltimore

A few days ago, my Twitter followers may be been slightly mystified by my Tweets about finding hidden treasures in Baltimore.



I had the inestimable pleasure of seeing a private collection of clocks, mechanical musical instruments, old fans, lamps, and more... all very rare and very interesting.

The tower clock collection was particularly impressive. The house was fitted with several tower clock dials on the outside. I've gone down that street many years and never looked up to notice them. There is even a dragon outside that strikes a bell with his tail. On the inside, there were some large tower clock movements (like the one pictured above) with slots cut in the floor below them so that the pendulum could swing in the room below.

I did a reblog post a few weeks ago from a Steampunk site about old tower clock towers being converted into apartments - but those places didn't have clocks in them.





There were several tower clocks, most with 3-legged gravity escapements. The whole house seemed to tick away, as if the collector were living inside a giant engine room.




...That's just the tower clocks, in addition there are Winterhalter u. Hoffmeier tubular chimes, regulator master clocks, and Egyptian Revival clocks aplenty...

The place isn't called Orchestrion Hall for nothing. The collector is a worldwide authority on mechanical organ restoration, particularly the very rare and very excellent Welte orchestrions.




He has more mechanical musical instruments too, including a very loud band organ.



His shop is in the basement below, and he uses all turn-of-the-century, belt-driven machines. When I jokingly asked where the steam engine was he pointed to an original early electric motor, and around the corner (in the basement) there was a HUGE single-cylinder Diesel engine.

The collection also includes fans...




This one has a light bulb that's used only for impedance, to slow down the fan.

I wish I had more pictures. This place was a treasure trove of fascinating stuff!

Thanks to Arcadian Clock for some of the pictures above.

Homemade Mechanical Music

... or mechanical noises anyway. This is a fascinating table of homebrew fun!

Dirigenten & Den mekaniska orkestern from Erik Nilsson on Vimeo.

[via Deviant Synth]

New Chimneysweeps!

We are proud to introduce a new musical cuckoo clock. This charming Chalet has fresh lines and colors. The chimneysweep hopps in and out of his chimney - startled by the cuckoo call. There is also a music box that plays, and the waterwheel turns.

Fans of North Coast Imports already know about the charming version without music (the 1216) now we are pleased to announce that we can offer a larger version with music too! (see model number 1316)

How cuckoo clock music is supposed to work

Below you can watch a movie (visit our YouTube channel!) with a cuckoo music box functioning properly. Sometimes minor adjustments need to be made to the two arms connecting the clock mechanism to the music mechanism. As you watch the video, pay attention to the two black arms that reach in from the left side. One on top and one in the middle (touching the spinning fan-fly or governor).



In the first part of the video you see one cuckoo call and music right away. The second part shows how the music mechanism is first started by the cuckoo mechanism, held while the cuckoo calls, and then released to allow it to play.

The thicker, black metal arm on top unlatches the music drum and the music mechanism so that the drum starts to turn. It is abruptly stopped however by the second, thinner wire that touches the brass fan-fly. This stopping wire remains in place until the cuckoo bird has finished its call.

If this second wire didn't stop the fan-fly from spinning, the music would play while the cuckoo bird calls and cause cacophony.

Once the bird has finished the call the wire gets out of the way, allowing the fan-fly to spin and the music to play.

As the tune reaches its end, the black metal finger on top should be far enough away from the music box arm below it to allow the latch to fall in the hole and stop the music.

Watch the video again:



This video is provided as an example of how this SHOULD work. If you make adjustments to your cuckoo clock music make sure that they are INCREMENTAL adjustments. The tiniest change in the placement of these two arms will be all the adjustment you should make. Any adjustments to either the clock or the music mechanism should be done by a trained professional. The gears, teeth, and wheels inside either mechanism are very delicate and precise. Please don't try to make repairs to either mechanism, but you may try to make tiny adjustments to the two wires that connect the two mechanisms as described above.

NOTE: The movie here shows a music mechanism in an 8-day cuckoo clock. This is important because most 8-day clocks don't allow the music to play on the half-hour.

NOTE: The clock featured in this movie is the 2005 award winner of the VDS Clock of the Year. This clock was produced as a limited edition of only 111 pieces for the 111th anniversary of Rombach und Haas.

A few pieces are still available: